Mid-State Equipment

Information

2025 John Deere Mounted Planters 1725 Integral Stack-Fold

• Offered in 12-, or 16-row configuration

• Row spacing options include 30 in. (76.2 cm.), 36 in. (91.44 cm.)., 38 in. (96.5 cm.), and ?40 in (101.6 cm.). for 12-row frames, and 30 in. (76.2 cm.) spacing for 16-row frames.

• Available in 1.6 bu. or 3 bu. MaxEmerge™ 5 row unit

• Insecticide option for 1.6 bu.

Features may include:

• 1725 Planter configurations

• The 1725 Planter is available in the following configurations:

• 1725 12Row 30 in.

• 1725 12Row – 36 in.

• 1725 12Row – 38 or 40 in.

• Before placing an order, please reference the Build and Price tool for any recent revisions to the below information.

• Pneumatic downforce system

• Pneumatic downforce provides convenient, simple adjustment of downforce for the whole planter from one location. The amount of downforce applied is infinitely adjustable from 0 kg to 181.4 kg (0 lb to 400 lb). Pneumatic downforce provides more consistent downforce throughout the range of row-unit travel than mechanical spring downforce systems.

• Several pneumatic downforce system improvements have been implemented, including:

• 9.5-mm (3/8-in.) air delivery line instead of the 6.4-mm (1/4-in.) line used on model year 2010 and older planters.

• Air compressor assembly increased duty cycle. With this compressor, it provides a 47 percent increase in maximum air flow delivery compared to the prior air compressor.

• Pneumatic air bags with 9.5-mm (3/8-in.) air line inlets that have greater durability.

• Such improvements to the pneumatic downforce system enable faster and more precise control of row-unit downforce while planting.

• Each row-unit has a single, rubber air bag located between the parallel arms. The air bags are hooked in parallel so that air can be added or released from all rows at once from one location.

• Pneumatic downforce systems are available as base equipment on all 1700 Series and DB Planters. The individual pneumatic downforce air bag assemblies, air compressor units, and 9.5-mm (3/8-in.) delivery lines are also available as an attachment for field conversion.

• An improved compressor is used to charge the pneumatic system. This compressor can be located on the planter frame or in the tractor cab if desired. A gauge at the compressor indicates the amount of downforce being applied.

• From the factory, integral planter models with pneumatic downforce will have an improved air compressor assembly with an in-cab mounting bracket, except the 1725 16Row and 1725 Central Commodity System (CCS™) Twin-Row Planters which will have the air compressor assembly mounted on the planter frame. For drawn planter models, the 1755, 1765, 1765NT, 1775 Front-Fold, and 1785 Drawn Planters will have the air compressor assembly installed either on the outer hitch or wing frame members when the pneumatic downforce system is installed.

• Row cleaner options to meet residue management needs

• Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no-till practices. Row cleaners are an essential tool in managing this increased amount of residue.

• John Deere seeding group offers a variety of row cleaner options to meet the needs of a producer's operation. Compatibility varies by model, row spacing, and other planter equipment.