2025 John Deere Drawn Planters 1775NT 12Row30

2025 John Deere Drawn Planters 1775NT 12Row30

Swipe to View More

  • Year 2025
  • Make John Deere
  • Model Drawn Planters
2025 John Deere Drawn Planters 1775NT 12Row30

2025 John Deere Drawn Planters 1775NT 12Row30

2025 John Deere Drawn Planters 1775NT 12Row30

  • 12 rows on 30-in. spacing
  • Insecticide option for mini-hopper and 1.6-bu.
  • 3-section frame flexes 21 degrees up & down with narrow transport of 12 ft.

Features may include:

  • ExactShot™ liquid fertilizer dosing system
  • Save on in-furrow fertilizer cost with ExactShot liquid fertilizer dosing system.
  • High input costs reduce the profitability of any operation. ExactShot can save growers up to 66% of the cost of in-furrow applied nutrients improving their use and efficiency while protecting yield loss along the way. It does this by dosing the product on top of the seed, in the furrow, eliminating the application of product between seeds.
  • Using less product also results in fewer stops to refill your tanks, improving the overall efficiency of your planting operation.
  • Reduce in-furrow fertilizer use up to 66 percent
  • Increase time between starter liquid fertilizer refills in the field
  • Maximize nutrient use efficiency by placing product only on the seed
  • Enable the potential to add higher-cost or additional applications
  • Easy fluid transfer with the ExactRate™ fluid transfer system
  • The ExactRate fluid transfer system pairs planters seamlessly with the ExactRate tractor tanks. It provides an easy connection point to allow transfer from the ExactRate tractor tanks back to the planter tank. This enables up 6056 L (1600 gal.) of combined capacity between the tractor and planter tanks.
  • Factory installed
  • Designed and tested by John Deere to ensure the lines won’t pinch when folding
  • Easily attaches to the ExactRate tractor tanks
  • Easily carry fluid on the planter with liquid tanks
  • John Deere factory-installed liquid tanks offer a convenient way to carry fluid on the planter frame. Styling cues match the CCS™ system tanks, and all brackets and mountings are 100 percent factory installed.
  • Factory installed
  • Up to 2271 L (600 gal.) of fluid capacity
  • Clear sight tube to check fluid level
  • Air bleed and overflow protection
  • Decrease ground pressure with factory-installed tracks for 1775NT Planters
  • Alleviate the ground pressure in your center section with John Deere factory-installed tracks. The tracks offer a larger footprint to allow for less compaction and better flotation.
  • 91.7-kPa (13.3-psi) ground pressure (based on weight distribution of a fully ballasted 24-row 1775NT Planter over track flat plate area)
  • 32.2-km/h (20-mph) transport speed
  • Half-full carrying capacity during transport on a 24-row 1775NT Planter
  • 100 percent factory installed
  • Increase visibility at night with light-emitting diode (LED) lighting package
  • As planting windows get tighter, many growers are working longer hours to get the seed in the ground. With the planter LED lighting package, John Deere delivers better visibility when planting a night.
  • Four additional LED lights
  • Improves visibility when planting at night
  • Illuminates row-units when servicing at night
  • Turns on when tractor lights are engaged

PTO

PTO Power, Rated Engine Speed Minimum tractor size required: 90 kW (120 PTO hp)

Drivetrain

Drive System Hydraulic variable rate drive

Wheels & Tires

Tires, Rear Specification Implement tire: VF245/70R19.5

Hydraulics

Maximum Pressure Hydraulic system working: 20,684 kPa / 206.84 bar (3000 psi) | burst: 82,737 kPa / 827.37 bar (12,000 psi) | Tractor standby: 15,514 kPa / 155.14 bar (2250 psi)

Dimensions

Dimensions Row spacing: 76 cm (30 in.) | Frame - Flexibility: Up and down: 21° (angle)
Length Field operation: 6226 mm (245.1 in.)
Transport Height 3487 mm (137.3 in.)
Transport Length 9197 mm (362 in.)
Transport Width With markers: 3494 mm (137.56 in.)
Width Field operation: 9937 mm (391.2 in.)

Capacities

Hopper Capacity Row unit seed: 2.2 L (0.062 bu) / 58 L (1.65 bu) / 106 L (3.0 bu)
Oil capacity Hydraulic required to operate machine: 5.7 L (1.5 gal.)
Volume Central Commodity System: Seed capacity 3524 L (100 bu) | Fertilizer Tank capacity: 1590 L (420 gal.)

Features

Features Number of rows: 12 | Markers Type: Automatic alternating or independent control | Row Units type: MaxEmerge™ 5 row units
Lift Mechanism Type: Wheel modules with hydraulic cylinders
Opener Type Tru-Vee double disk
Seed Meters Base: Vacuum

Product Photography